Switch everything on
Two switches, in this order.
- Switch on the mains breaker marked AV, in the board on the column near the desk.
- Switch on the cabinet using the switch shown in the photos.
- Check the ATEM switcher has lit up. It powers on with the cabinet.
Set the still images (MP1 and MP2)
Load a still image into the ATEM so you can put it on screen from the Stream Deck.
- Open the ATEM Software Control app.
- From the four icons along the bottom, choose Media.
- Drag and drop your image into placeholder 1 or 2. These are set up as MP1 and MP2.
- Check the image appears in the Multiview screen.
You can now send MP1 or MP2 to the screens with the purple MP1 and MP2 keys on the Stream Deck. See Switch inputs.
Set up the Stream Deck and OpenLP
Once everything has booted, press the AV key on the Stream Deck. This opens all the controls you need for a standard meeting.
- Press AV on the Stream Deck.
- If the OpenLP keys show a red warning triangle, OpenLP isn't detected yet. Usually it just hasn't been opened.
- Open OpenLP.
- Go back to the Bitfocus Buttons window that opened at start-up and press any of the refresh icons next to the items in the list.
- The Stream Deck restarts. With OpenLP open, the triangles should be gone.
Red triangle on a key? The software that key controls isn't running. Open it, then refresh in Bitfocus Buttons.
Control OpenLP
The blue keys control what OpenLP sends to the screens. The top row matches the four buttons under the Live column in OpenLP.
- BlankShows a blank black screen.
- ShowShows the lyrics, or whatever OpenLP is set to output.
- ThemeShows just the background.
- DesktopStops OpenLP taking over the output. Use this when PowerPoint or anything else needs to be on screen while OpenLP is open.
- Prev / NextSecond row. Moves the lyrics back or forward a slide.
Choose what's on the TVs
The keys outlined in yellow control the ATEM, which decides which input (PC, laptop, camera or still) is on the hall screens.
- Press an input key on the bottom row. It appears in the Multiview as the preview (green arrow in the photo).
- Check it looks right.
- Press Cut or Auto. It goes live on the hall TVs and shows as Program in the Multiview (red arrow).
- TailCamera
- MainMain AV PC (mini PC)
- SecSecondary laptop, at the back or front
- MP1 / MP2Still image set in the ATEM (stage 2)
- CutSwitches instantly.
- AutoFades across.
Use a laptop at the front
You can set up a laptop at the front of the hall, as long as it has already been configured to connect as the secondary PC.
- Plug the laptop into the HDMI cable at the front column.
- On the Stream Deck, press Sec to preview it, then Cut or Auto to put it live.
Not configured yet? Set the laptop up to connect to the secondary PC before the meeting, not during it.